I have a single Panstamp AVR node transmitting sensor data to an AVR Panstamp running the modem sketch on a Raspberry Pi, which is running Lagarto-SWAP. It is all working well, but I would like to use an NRG2 Panstamp in place of the AVR as the serial gateway. I have loaded the modem sketch onto the NRG2, verified that I can talk to it in command mode, and made sure that the frequency matches. It is also receiving data packets from the remote node. Unfortunately I don'r receive any data through Lagarto-SWAP when I replace the AVR with it. I assume this means that the Lagarto-SWAP configuration is misconfigured for the NRG2, but I cannot find anything that might prevent communication. Does anyone know what the differences might be?
↧